How to use acrylic foam adhesive

How to use acrylic foam adhesive

In order to ensure that acrylic foam maintains a better bonding ability during use and avoid poor bonding caused by application errors, some precautions need to be paid special attention to, which will guide you in the application process to create more suitable conditions to avoid the impact of environmental factors.

Step 1:

Before pasting, the surface of the paste should be dried and cleaned, and the dusty and wet surface of the adhesive is easy to cause the adverse reaction of insufficient adhesion and easy separation.

Step Two:

Use a clean cloth and a small amount of isopropyl alcohol to wipe the surface of the paste, do not use grease ingredients to wipe, such as household cleaners.

Step Three:

During the bonding process, scrape or scrape evenly along the adhesive direction of the tape with your palm, which is more conducive to discharging bubbles and making the bonding closer.

Step 4:

To fit the other side of the adhesive, first smoothly peel the release film of acrylic foam, and then paste it on, applying pressure with the same pipe

Step five:

After 24 to 48 hours of bonding, excellent bonding strength can be achieved, during this period, attention should be paid to protect the adhesive from external interference, and the ambient temperature is maintained balanced